Setting The Rx Rate Limit Of A Specified Pf (-T Pf_Rx_Rate -L); Deleting The Rx Rate Limit Of A Specified Pf (-T Pf_Rx_Rate -C) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide

6.1.4.42.8 Setting the RX Rate Limit of a Specified PF (-t pf_rx_rate -l)

Function
The -t pf_rx_rate -l command is used to set the RX rate limit of a specified PF.
Format
hinicadm sdi_cfg -i <devicename> -t pf_rx_rate -l <cir,cbs>
Parameters
Parameter
devicename
cir,cbs
Usage Instruction
None
Example
# Set the RX rate limit of a specified eth4 device.
linux-xvUVkf:~ # hinicadm sdi_cfg -i eth4 -t pf_rx_rate -l 1000000,800000
Set eth4 pf rate succeed.

6.1.4.42.9 Deleting the RX Rate Limit of a Specified PF (-t pf_rx_rate -c)

Function
The -t pf_rx_rate -c command is used to delete the RX rate limit of a specified PF.
Format
hinicadm sdi_cfg -i <devicename> -t pf_rx_rate -c
Parameters
Parameter
devicename
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose FEC mode is to
be set in the system.
Indicates the TX rate limit.
Description
Indicates the name of the
IN200 whose FEC mode is to
be set in the system.
Copyright © Huawei Technologies Co., Ltd.
6 Management Tools
Value
Example: hinic0 and
hinic1
l The unit of cir is kbit/s.
l The unit of cbs is kbit.
Value
Example: hinic0 and
hinic1
107