Querying The Rx Rate Limit Of A Specified Pf (-T Pf_Rx_Rate) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
Usage Instruction
None
Example
# Delete the TX rate limit of a specified eth4 device.
linux-xvUVkf:~ # hinicadm sdi_cfg -i eth4 -t pf_rx_rate -c
Clear eth4 pf rate limit succeed.

6.1.4.42.7 Querying the RX Rate Limit of a Specified PF (-t pf_rx_rate)

Function
The -t pf_rx_rate command is used to query the RX rate limit of a specified PF.
Format
hinicadm sdi_cfg -i < devicename> -t pf_rx_rate
Parameters
Parameter
devicename
Usage Instruction
None
Example
# Query the RX rate limit of a specified eth4 device.
linux-xvUVkf:~ # hinicadm sdi_cfg -i eth4 -t pf_rx_rate
eth4 pf_rx_rate 100000000kbps,2560000kbits.
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose FEC mode is to
be set in the system.
Description
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Copyright © Huawei Technologies Co., Ltd.
6 Management Tools
Value
Example: hinic0 and
hinic1
Value
Example: hinic0 and
hinic1
106