Setting The Ets Function (Ets); Querying And Setting The Ets Function (-E) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
mode
priority
Usage Instruction
After PFC is enabled for the first time after you run the -e command, you can run the -p
command to set the PFC pointer priority.
Example
# Check whether PFC is enabled for enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0
enp6s0
pfcup:
num TC's:
# Enable PFC for enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0 -e 1
Set enp6s0 pfc to enable succeed
# Enable the PFC for priority 2 and priority 3 of enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0 -p 00110000
Set enp6s0 pfc to enable succeed.
Set enp6s0 pfc succeed

6.1.4.47 Setting the ETS Function (ets)

6.1.4.47.1 Querying and Setting the ETS Function (-e)

Function
The ets -e command is used to query or set the ETS function of a device.
Format
hinicadm ets -i <devicename> -e <mode>
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 to be queried and set in
the system.
Enables or disables the PFC
function.
Enables or disables PFC
pointer for the 0–7 priority.
pfc state: disable
1 1 1
4
Copyright © Huawei Technologies Co., Ltd.
1 1 1
6 Management Tools
Value
For example, the value can
be enp6s0 or enp7s0.
l 1: Enables PFC.
l 0: Disables PFC.
xxxxxxxx
l 1: enables the pointer.
l 0: disables the pointer.
1 1
111