Setting Nic Packet Data To Be Sent And Triggering Nic Packet Sending When Ac Power Is Lost (Reboot_Notice) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
rx(Gbps)
| 0
0.000000 |
| 2
0.000000 |
6.1.4.44 Setting NIC Packet Data to Be Sent and Triggering NIC Packet Sending
When AC Power Is Lost (reboot_notice)
Function
The reboot_notice command is used to set NIC packet data to be sent and trigger NIC packet
sending when AC power is lost
Format
hinicadm reboot_notice -i <devicename> -m <mode> -f <filename>
hinicadm reboot_notice -i <devicename> -s
Parameters
Parameter
devicename
mode
filename
Usage Instruction
l
l
Example
# Read the packet data to be sent on hinic0.
[root@localhost ~]# hinicadm reboot_notice -i hinic0 -m read -f ./read.file
File:read.file is created succeed
reboot_notice command succeed.
# Write the packet data to be sent to hinic0.
[root@localhost ~]# hinicadm reboot_notice -i hinic0 -m write -f ./write.file
reboot_notice command succeed.
Issue 06 (2019-07-27)
|
0.000 0.000000 0.000
0.004 0.003072 0.004
Description
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Reads packet data to be sent
from the NIC, or writes data
to the NIC.
Name of the file that stores the
packet data.
-s: triggers all ports of the NIC to send packet data.
This command supports only NICs of the TaiShan 2280 V2 and supports only Linux
OSs.
Copyright © Huawei Technologies Co., Ltd.
0.000000 | 1 0.000
0.001024 | 3 0.000
Value
Example: hinic0 and hinic1
l read: obtains packet data to be sent
from the NIC and saves the data to the
file specified by filename.
l write: writes data to be sent to the
NIC. The data is from the file
specified by filename.
-
6 Management Tools
0.000000 0.000
0.000000 0.000
109