Mechanical installation
Contents of this chapter
This chapter describes the mechanical installation of the brake units.
Brake unit
The ACS880 multidrive - the brake unit as one part of the complete drive - is transported in
sections. See ACS880 liquid-cooled multidrive cabinets mechanical installation instructions
(3AXD50000048635 [English]).
Brake resistor cabinet
Installation guidelines:
•
Install the brake resistor cabinet separate from the basic drive line-up
•
Make sure that the installation site has proper ventilation. The ventilation must meet
the air flow amounts specified.
•
For the installation instructions, see ACS880 multidrive cabinets mechanical installation
instructions (3AUA0000101764 [English]).
User-defined brake resistors
Obey the brake resistor manufacturer's instructions.
Mechanical installation 23
3
10