Toyota CAMRY HV Manual page 79

Child restraint system fixed with an ISOFIX lower anchorage
ISOFIX lower anchorages (ISOFIX child restraint system)
■
Lower anchorages are provided
for the rear outboard seats.
(Marks displaying the location
of the anchorages are attached
to the seats.)
Installation with ISOFIX lower anchorage (ISOFIX child
■
restraint system)
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the child restraint system on hand is not within the "universal" cat-
egory (or the necessary information is not in the table), refer to the
"Vehicle List" provided by the child restraint system maker for vari-
ous possible installation positions, or check the compatibility after
asking the retailer of the child seat. (P. 67, 68)
Adjust the seat
1
When using the reclining type rear seat

Adjust the seatback angle to the most upright position.
When installing a forward-facing child seat, if there is a gap
between the child seat and the seatback, adjust the seatback
angle until good contact is achieved.
If the head restraint interferes with your child restraint system,
2
and the head restraint can be removed, remove the head
restraint.
Otherwise, put the head restraint in the upper most position.
(P. 227)
CAMRY_HV_EE
1-2. Child safety
79
1