Table of Contents
Advertisement
138
2. Instrument cluster
■
The meters and display illuminate when
The power switch is in ON mode.
■
Brightness of the meters (day mode and night mode)
●The brightness of the meters is changed between day mode and night
mode.
• Day mode: When the tail lights are off or when the tail lights are on but
the surrounding area is bright
• Night mode: When the tail lights are on and the surrounding area is dark
●When in night mode, the brightness will be reduced slightly unless the
meters are set to the maximum brightness level.
■
Hybrid System Indicator
Charge area
1
Shows regenerative charging.
Hybrid Eco area
2
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Eco area
3
Shows that the vehicle is being driven in
an Eco-friendly manner.
Power area
4
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
●By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
●Charge area indicates "regeneration"
used to charge the battery.
*
: When used in this manual, "regeneration" refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
The Hybrid System Indicator will not operate in the following situations:
●The "READY" indicator is not illuminated.
●The shift lever is in any position other than D or S.
CAMRY_HV_EE
*
status. Regenerated energy will be
Advertisement
Table of Contents
