Table of Contents
Advertisement
76
1-2. Child safety
Child restraint system fixed with a seat belt
Installing child restraint system using a seat belt
■
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the child restraint system on hand is not within the "universal" cat-
egory (or the necessary information is not in the table), refer to the
"Vehicle List" provided by the child restraint system maker for vari-
ous possible installation positions, or check the compatibility after
asking the retailer of the child seat. (P. 67, 68)
Adjust the seat
1
When using the front passenger seat
If installing the child restraint system to the front passenger seat
is unavoidable, refer to P. 62 for front passenger seat adjustment.
When using the reclining type rear seat
Adjust the seatback angle to the most upright position.
When installing a forward-facing child seat, if there is a gap
between the child seat and the seatback, adjust the seatback
angle until good contact is achieved.
If the head restraint interferes with your child restraint system,
2
and the head restraint can be removed, remove the head
restraint.
Otherwise, put the head restraint in the upper most position.
(P. 227)
Run the seat belt through the
3
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance
enclosed
restraint system.
CAMRY_HV_EE
to
the
directions
with
the
child
Advertisement
Table of Contents
