Table of Contents
Advertisement
310
4-5. Using the driving support systems
Changing settings of the pre-collision system
Enabling/disabling the pre-collision system
■
The pre-collision system can be enabled/disabled on
of the multi-information display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
Changing the pre-collision warning timing
■
The pre-collision warning timing can be changed on
of the multi-information display.
The operation timing setting is retained when the power switch is turned
off.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
CAMRY_HV_EE
(P. 148)
(P. 148)
Advertisement
Table of Contents
