Table of Contents
Advertisement
Selecting constant speed control mode
When constant speed control mode is selected, your vehicle will main-
tain a set speed without controlling the vehicle-to-vehicle distance.
Select this mode only when vehicle-to-vehicle distance control mode
does not function correctly due to a dirty radar sensor, etc.
With the cruise control off,
1
press and hold the cruise con-
trol main switch for 1.5 seconds
or more.
Immediately after the switch is
pressed, the dynamic radar cruise
control indicator will come on.
Afterwards, it switches to the cruise
control indicator.
Switching to constant speed control mode is only possible when operating
the switch with the cruise control off.
Accelerate or decelerate, with
2
accelerator pedal operation, to
the desired vehicle speed (at or
above approximately 40 km/h
[25 mph]) and press the "- SET"
switch to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment the switch is released becomes the set
speed.
Adjusting the speed setting: P. 339
Canceling and resuming the speed setting: P. 341
CAMRY_HV_EE
4-5. Using the driving support systems
343
4
Advertisement
Table of Contents
