Toyota CAMRY HV Manual page 357

Audio system screen (RCTA function only)
4
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, the RCTA icon (P. 370) for the detected side will be displayed.
buzzer (
5 RCTA
When a vehicle approaching from the right or left rear of the vehicle is
detected, a buzzer sounds from behind the rear seat.
Turning the BSM function/RCTA function on/off
Press
1
Press
2
Press
3
Each time
■ The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■ RCTA buzzer hearing
RCTA function may be difficult to hear over loud noises such as high audio
volume.
■
When "Blind Spot Monitor Unavailable" and "Rear Cross Traffic Alert
Unavailable" are shown on the multi-information display
Ice, snow, mud, etc., may be attached to the rear bumper around the sensors.
(P. 366)
The system should return to normal operation after removing the ice, snow,
mud, etc. from the rear bumper.
Additionally, the sensors may not operate normally when driving in extremely
hot or cold environments.
■
When there is a malfunction in the Blind Spot Monitor
If a system malfunction is detected due to any of the following reasons, a
warning message will be displayed:
●There is a malfunction with the sensors
●The sensors have become dirty
●The outside temperature is extremely high or low
●The sensor voltage has become abnormal
CAMRY_HV_EE
4-5. Using the driving support systems
function only)
RCTA
of the meter control switches, select
/
of the meter control switches, select
/
of the meter control switch.
is pressed, the function changes on/off.
357
.
or .
4