Dpoae Diagnostic / High Resolution Test Results; Dpoae Threshold - natus Otometrics Bio-logic AuDX PRO FLEX Quick Start Manual

Quick Guide:
Bio-logic AuDX PRO FLEX
®

DPOAE diagnostic / high resolution test results

Note: These circles
indicate that other
screens are available
to view. Swipe your
finger right or
left to get other
Green check marks
indicate valid
response

DPOAE threshold

Select one of the Presets for
DPOAE Threshold and connect
the red probe to the red
connector. To perform binaural
testing, also connect the blue
probe to the blue connector.
9
Quick start
®
Red or blue bars
indicate response,
grey bars
indicate noise
Print results to a
label or to a pdf file
Outcome for
each test sorted
by f2 and L2
Otometrics - Next generation Bio-logic products
High resolution
test results (4 PPO)
Select the appropriate ear tip
size and place it on the probe
tip. Insert the probe in the ear
making sure that the ear tip fits
tightly into the ear canal.
Select the test ear by pressing
either the Right or Left button,
or the Right + Left button for
binaural testing.
Cartoon mode will start the test
showing a cartoon instead of the
progress bar, this can be changed
during the test by tapping on the
plane icon at the bottom of the
device screen.
Bio-logic
®
Numeric values
shown in
table format
Test other ear