natus Otometrics Bio-logic AuDX PRO FLEX Quick Start Manual page 6

Quick Guide:
Bio-logic AuDX PRO FLEX
®
Select the appropriate ear tip size and place it on the probe tip.
Insert the probe in the ear making sure that the ear tip fits tightly
into the ear canal.
Select one of the available Presets. Then select the test ear by
pressing either the Right or Left button. Cartoon mode will start
the test showing a cartoon instead of the progress bar.
A calibration will be performed prior to measurement. A green light indicates successful calibration
(see below left). After successful ear probe calibration, the test will start automatically.
6
Quick start
®
Progress for each
tested frequency
Overall test progress
Noise floor level
Probe fit override for
patients with PE tubes
or tympanic membrane
perforation
Otometrics - Next generation Bio-logic products
Bio-logic
®