Table 3: Bl2500 Electrical, Mechanical And Environmental Specifications - OEM BL2500 User Manual

PLC BL2500 User's Manual
EMBEDDED

Table 3: BL2500 Electrical, Mechanical and Environmental Specifications

Microprocessor
Ethernet Port
Flash Memory
SRAM
Backup Battery
Digital I/O
Analog Inputs
Analog Outputs
RabbitNet
Serial Ports
Real-Time Clock
Timers
Watchdog/Supervisor
Power
Temperature
Humidity
Connectors
Board Size
Part Number
1
Only 1 analog output is available for
2
Not supported in
EMBEDDED
3
Only 1 RS232 (serial port E) and 1 RS485 (serial port D) serial ports are supported in
this present time.
OEM Technology Solutions
3 V lithium coin-type, 1000 mA-h, supports RTC & SRAM
16 inputs: 15 protected to ±36 V DC, 1 protected to +5 – 36 V; threshold is 1.5 V
nominal
8 outputs: sink up to 200 mA each, 36 V DC max. standoff voltage
One 10-bit resolution, 8-bit accuracy, input range 0.1 – 3.1 V, 10 samples/s
Two 9-bit PWM, 0.1 – 3.1 V DC, 17 ms settling time
3
6 serial ports :
- 1 RS-485
- 2 RS-232 or 1 RS-232 (with CTS/RTS)
- 1 CMOS level asynchronous or clocked serial port
- 1 expansion serial port for multiplexed to two RS-422 clocked SPI ports
- 1 CMOS compatible serial port for programming/debug
10 8-bit timers (6 cascadable from the first) and one 10-bit timer with 2 match
2
registers
8 – 40 V DC, 1 W typical w/ no load
Friction-lock connectors:
- five polarized 9-position terminals with 0.1" pitch
- two 2-position power terminals with 0.156" pitch
- two 4-position terminals with 0.156" pitch
PLC.
EMBEDDED
PLC at this present time.
Rabbit 3000 @ 44.2 MHz
10/100 Base-T
512K
512K (program) + 256K (data)
2
Yes
Yes
Yes
-40°C to +70°C
5% to 95%, noncondensing
100 x 100 x 29 mm
101-0602
Specifications
1
PLC at
EMBEDDED
Page 61