OEM BL2500 User Manual page 37

PLC BL2500 User's Manual
EMBEDDED
6. Follow Steps 6 to 11 in Section 3.4.1 to create and populate application's Dictionary with three
Boolean variables (SW1, SW2 and LED1).
7. On the B25TEST5 – Programs window double-click on SFCtest1 program.
8. Click on below Step 1. Click on OR divergence
single divergence and then on Transition
on below the transition and add Step 2 by pressing Step
to add Transitions 3, 4 and 5, Step 3, a single divergence and a Jump to Step 1. The final program
screen should be as shown below.
9. Double-click on Transition 1 and write the expression SW1 XOR SW2; on the Transition GT1 ST/LD
editor that is displayed.
OEM Technology Solutions
5. Select File menu → New. On the New program window
enter the name of the program (for example, SFCtest1); a
brief comment; select the Language to SFC; select Begin
Style and press OK button. The SFCtest1 program is
displayed in the B25TEST5 – Programs window.
to add a single divergence. Click on below
to add a transition after the single divergence. Click
Running Sample Applications
button. Repeat the same procedure
Page 31