OEM BL2500 User Manual page 62

PLC BL2500 User's Manual
EMBEDDED
Q8. I already have a version of ISaGRAF Workbench V3.50 installed and licensed. What should I
do or install to make it
If you already have an ISaGRAF Workbench V3.50 running on you Host PC, use the following
instructions to make your ISaGRAF Workbench compatible with
(a) Download the ISaGRAF_V3.50.zip file from OEM Technology Solutions website
(http://www.oem.net.au).
(b) Extract all files to a local directory <ISaGRAF Install Dir>.
(c) Copy <ISaGRAF Install Dir>\EXE\RABBIT.RSC and <ISaGRAF Install
Dir>\EXE\ISATXT.ERR to where your ISaGRAF main directory resides <ISaGRAF Main
Dir>\EXE (for example, C:\ISAWIN\EXE). Confirm yes at overwriting ISATXT.ERR file.
(d) Edit <ISaGRAF Main Dir>\EXE\RSCDEF.RSC and add the following line:
R esource=RABBIT.rsc

T his line will add the "RABBIT: TIC code for Rabbit-based controllers" in the Targets list in

the Compiler Options window of the ISaGRAF Programs Manager. You will have to
recompile all your programs against this TIC code type in order to work with the
PLC BL2500.
Q9. I have a BL2500 with 256K Flash. Can I use
The PLC Firmware Kernel for BL2500 Version 1.04 was built specifically for the BL2500
EMBEDDED
with Rabbit core module RCM3200 (10/100BaseT, 512K Flash, 256K + 512K SRAM, 44.2 MHz
clock speed, Z-World P/N: 101-0602). If you have any special requirements regarding targets that
PLC supports, visit OEM Technology website or contact sales directly via phone +61 2
EMBEDDED
99669424 or email sales@oem.net.au.
Q10. What does the letter C after the BL2500 in the BSP filename stand for?
The 'C' letter in the filename BL2500C_BSP_V1.04_9-0003-006.zip corresponds to the type of
the BL2500 board supported by
Rabbit core module RCM3200 (10/100BaseT, 512K Flash, 256K + 512K SRAM, 44.2 MHz clock
speed). At this moment only the BL2500 mentioned above is supported by
Q11. Can I use the
EMBEDDED
No. The
EMBEDDED
Utility instead.
Q12. Can I use the Rabbit Field Utility to download the
Target?
No. If you do so, when you tried to enter the run-time license using the
following message is displayed:
OEM Technology Solutions
PLC compatible?
EMBEDDED
EMBEDDED
PLC Utility to download binary files compiled with Dynamic C?
PLC Utility works only with
EMBEDDED
PLC BL2500?
EMBEDDED
PLC. Thus, the letter C corresponds to the BL2500 with
PLC firmware kernels. Use Rabbit Field
EMBEDDED
PLC Firmware Kernel to the
EMBEDDED
FAQ and Troubleshooting
PLC:
EMBEDDED
PLC.
EMBEDDED
PLC Utility the
EMBEDDED
Page 56