Adding The Software License; Adding A Hardware License (Optional) - OEM BL2500 User Manual

PLC BL2500 User's Manual
EMBEDDED
4. If you have access to the Internet and have an e-mail account:
a) Press Proceed... button. A new mail message of your default e-mail client (such as Microsoft
Outlook) will be displayed. Fill out the information on the message body: Contact details and
Workbench Serial Number (located on the License Registration Form). Once you have filled out
all the information, send the e-mail to support@oem.net.au. The e-mail client application must be
running before pressing Proceed... button.
b) Alternatively, if instead of e-mail client (such as Microsoft Outlook) you use web-based email or a
command line e-mail (such as pine), compose manually a new message indicating the
Workbench Serial Number that appears in the License Registration Form, User Code 1 and 2,
and Contact details, and send it to support@oem.net.au.
5. Alternatively, if you do not have an e-mail address or access to the Internet, copy the User Code 1
and User Code 2 into the ISaGRAF License Registration Form that comes in the Application Kit
and send the completed form to OEM Technology Solutions by fax (Fax Number: +61 2 9966 9429).
6. OEM Technology Solutions will send you the ISaGRAF software license within two business days of
receiving the completed Form. Press Close button to close the License Manager.

2.3.1 Adding the software license

The ISaGRAF software license consists of two sets of 4 Registration Keys. Upon reception of the
Registration Keys, open License Manager and follow these instructions:
1. On the Available Components select ISaGRAF 3 Software License and press Add button. Select
the purchased number of I/O points to license (32 if you purchased the
Kit) and press OK button.
2. Enter the first set of Registration Keys and press
Register button. Setup Code will change to SET:
WDE15. Enter the second set of Registration
Keys and press Register button again. In the
Selected Components ISaGRAF 3 Software
License will be displayed as Active. Press
Close button to close the License Manager.
Congratulations! Your ISaGRAF Workbench is
now licensed.
Note:
If you want to purchase a hardware license or upgrade your current software license, please
contact OEM Technology Solutions (sales@oem.net.au) for pricing information and payment
options. When you purchase a software license it is very important to include the following
information in your Purchase Order:
•
Setup Code, User Code 1 and User Code 2.
To obtain these codes open the ISaGRAF License Manager (Start menu → Programs →
ISaGRAF 3.5 → Licensing). On the Available Components select ISaGRAF 3 Software
License and press Add button. Select the desired number of I/O points to license (128, 256
or Unlimited) and press OK button. The Setup and User codes appear on the License
Manager window. If you press Proceed... button, a new e-mail message window is displayed
(if you have an e-mail client running such as Microsoft Outlook). You can fill out the required
information and send that e-mail to obtain license pricing and payment information.
•
Contact details (Company, Name, Address, Telephone, Fax and e-mail).

2.3.2 Adding a hardware license (optional)

When using a hardware license (dongle) on Windows 2000/XP systems, you must install the Sentinel
driver in order for the dongle to be seen.
OEM Technology Solutions
Getting Started
PLC Application
EMBEDDED
Page 9