Bios Setup; Entering Setup - Advantech MIC-3329 Series User Manual

2.2

BIOS Setup

The MIC-3329 Series system has AMI BIOS built in, with a CMOS SETUP utility that
allows users to configure required settings or to activate certain system features. The
CMOS SETUP saves the configuration in the CMOS RAM of the motherboard. When
the power is turned off, the battery on the board supplies the necessary power to pre-
serve the CMOS RAM. But there is CMOS backup mechanism in MIC-3329 to pro-
tect user's personal setting, which allows final BIOS setup information is reserved
always except "date/time and user password" when remove CMOS battery or "erase
only password" by clear jumper.
When the power is turned on, immediately press the <Del> button during the BIOS
POST (Power On Self Test) to access the CMOS SETUP screen.
Control Keys
< → > < ←>:
<↑><↓>:
<Enter>:
<Esc>
<Page Up/+>
<Page Down/->
<F1>
<F2>
<F3>
<F4>
2.2.1

Entering Setup

Turn on the computer, and there should be a POST (Power-On Self Test) screen that
shows the BIOS supporting the CPU, immediately press <DEL> or <F2> to enter
Setup.
Select screen
Select item
Select
Main Menu - Quit, without saving changes to CMOS
Sub Menu - Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, for Setup Sub Menu
Previous values
Optimized defaults
Save and exit
Figure 2.2 Press <DEL> or <F2> to Run Setup
17 MIC-3329 User Manual