Video Menu; Audio Menu; Audio2 Menu - TANDBERG TT1220 Series Instruction Manual

Professional receivers and decoders
Hide thumbs Also See for TT1220 Series:
Table of Contents

Advertisement

C.4.5

Video Menu

The video signal status submenu contains information about the currently
decoded MPEG-2 video.
Table C.29: Video Signal Status Menu
Display title: SIG: VIDEO
HSize
VSize
Eff. Rate
Format
Pict. Rate
C.4.6

Audio Menu

The audio signal status submenu contains information about the audio
format and quality, of the currently decoded audio stream on the primary
output.
Table C.30: Audio Signal Status Menu
Display title: SIG: AUDIO
Coding
Mode
Rate (kbit/s)
Smpl
Prot
C.4.7

Audio2 Menu

The audio2 signal status submenu contains information about the audio
format and quality, of the currently decoded audio stream on the
secondary audio output.
Table C.31: Audio2 Signal Status Menu
Display title: SIG: AUDIO2
Coding
Mode
Rate (kbit/s)
Smpl
Prot
Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
Description
Display the horizontal resolution of the video
Display the Vertical resolution of the video
Shows the effective bit-rate of the video component in 188 byte
packet size
Shows the aspect ratio (4:3 or 16:9) of the video.
Displays the number of pictures per second being displayed, usually
25 Hz or 30 Hz.
Description
Display the audio coding model, as layer I, layer II or AC-3.
Shows the modulation mode reported used in the encoder. Mono, Dual
mono, Stereo or Joint Stereo is displayed depending on the input.
Shows the bit-rate, in kilobits per second, that the audio was coded.
Shows the sampling rate, usually 32, 44.1 or 48 kHz
Informs if protection bits are present for the currently decoded audio
stream.
Description
Display the audio coding model, as layer I, layer II or AC-3.
Shows the modulation mode reported used in the encoder. Mono,
Dual mono, Stereo or Joint Stereo is displayed depending on the
input.
Shows the bit-rate, in kilobits per second, that the audio was coded.
Shows the sampling rate, usually 32, 44.1 or 48 kHz
Informs if protection bits are present for the currently decoded
audio stream.
Menus
Section
Section
Section
Page C-15

Advertisement

Table of Contents
loading

Table of Contents