Emc Compliance Statements; Emc Compliance Approval; 61000-3-3 Fcc Part 15B Class A, Ices- 003 And As/Nzs 3548; Fcc - TANDBERG TT1220 Series Instruction Manual

Installing the Equipment
2.4

EMC Compliance Statements

2.4.1

EMC Compliance Approval

The following label, showing EMC compliance approval, is attached to the
device.
Figure 2.2: EMC Compliance Label
2.4.2 EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
FCC part 15B class A, ICES-003 and AS/NZS 3548
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
2.4.3

FCC

This equipment have been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
2.4.4

Connecting to a Public Telecommunication System

TT1220 is not constructed for electrical connection directly to any public telecommunication system.
None of the output signals shall be distributed directly from TT1220 to a public telecommunication
system leaving the building without using some kind of interface in between such as a telecom terminal,
switch or similar unit. Such kind of buffer is required to achieve a protective electrical barrier between the
public telecommunication system and TT1220. This electrical barrier is required to achieve protection
1 The EMC information was correct at the time of manufacture. The EMC tests were performed with the technical earth
attached.
Page 2-6
CAUTION...
against lightning or faults in nearby electrical installations.
Instruction Manual: Professional Receivers and Decoders (IRD)
1
ST.TM.TT1220.1