Rear Panel Alarm Indicator - TANDBERG TT1220 Series Instruction Manual

Table 5.3: Navigating the Alarm Status Menus
Step
1.
2.
3.
For description of all the alarm messages, refer to Annex D, Alarm
Categories and Conditions.
5.4

Rear Panel Alarm Indicator

The rear panel is fitted with an alarm relay. This relay is a charge over
contacts relay, which indicates both the Alarm and the OK state of the
unit.
The description of the relay is located in Chapter 2, Installing the
Equipment.
Figure 5.2: Alarm Relay
Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
Action
Go to the alarm menu, located under
the status menu.
Scroll up and down through the alarm
categories.
To check the alarm state of an
individual alarm, right click on a
category showing a warning or alarm
state.
1
5
6 9
ALARM
Result
The display will read "STATUS: ALARM" on the top
line.
Each category will show its status; OK, WARNING or
ALARM.
This will show a list of all current alarms generating a
warning or alarm message within the currently selected
alarm category.
Alarms
Page 5-5