Operation; Mode Control - Roksan Audio K3 Manual

Please refer to the front and rear panel views
The mains power switch (15) is located on the front under side of the
amplifier. This switch can be left ON for normal operation. If unattended for
a long period of time (going on a short break, holidays etc.) the mains
power should be switched OFF and the power cord disconnected from the
mains power input. When switched ON, your K3 integrated amplifier's
MODE indicator illumination will change to RED and the last selected input
will be selected. The amplifier will then automatically check its input/ output
status and after a brief moment when no problems are detected, the
speaker output relays will click on and the amplifier starts in normal
operation mode responding to all front panel buttons and the remote.
Pressing the MODE button once with the amplifier activated will mute/lower
the volume level by 20dB. The MODE indicator light will change to AMBER.
The amplifier remains fully functional in this mode. Pressing MODE again
un-mutes the amplifier and the MODE indicator light will change to RED.
Page 11
c/o Monitor Audio Ltd, 24 Brook Road, Rayleigh, Essex, SS6 7XJ
www.roksan.co.uk | info@roksan.co.uk | +44 (0)1268 740580

Operation

Switching On
Using the Controls

Mode Control

Roksan Audio ROK-1217 V2.3
April 2018