Chroma Inspire XT User Manual page 13

XLR 5-pin Cable:
Pin# Function
1 Common (Screen)
2 Data Minus
3 Data Plus
4 Spare Data Minus
5 Spare Data Plus
Note: Refer to ESTA (Entertainment Services and Technology Association) technical standards
program (TSP) documents (ANSI E1.27-2 -2009 (R2014)) for more detail about recommended
practice for permanently installed control cables for use with ANSI E1.11 (DMX512-A) and USITT
DMX512-1990 products or Click on the link below.
http://tsp.esta.org/tsp/documents/published_docs.php
Important Notice:
The maximum length of the DMX cable from each data output of the Inspire External Control Box to
the first Terminal Strip fixture is 500 ft (152 m).
Power Cable Color Code:
EU
Green and Yellow
Blue
Brown
Inspire XT User Manual
North America
Green Earth (E)
White Neutral (N)
Black Live (L)
Stripping Wire: Remove a minimum of
10mm / 0.4 inch insulation off the 14
gauge wire before inserting into the
phoenix connector.
To avoid short connections, keep some
gap between the wire terminations to the
connector. Once inserted, tighten the
screws, then gently pull and make sure
the connection is tight.
www.chroma-q.com
Connections
Ground (Green)
Neutral (Silver)
Hot (Gold)
12 V1.2 July, 2019