Reducing The Hardware Acceleration - QVI Cobra DRS-300 User Manual

Reducing the Hardware Acceleration

To reduce the hardware acceleration setting, follow the steps below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
On-line Help: See the topic, How to Scan a Part, for more information.
If you are still unable to see the scan in "real-time" repeat the above procedure
until one of the following conditions is met:
•
•
Note: If you have reduced the number of displayed colors and the hardware
acceleration, but still are unable to see the scan in "real-time," contact your local
authorized sales representative for further assistance.
Setting the Display Properties
Select Settings / Control Panel in the Windows Start menu.
Highlight and select Display.
Click on the Settings tab. The Display Properties window is displayed
(see image on the previous page).
Click on the Advanced button.
Click on the Performance tab (Windows 98 Second Edition) or the
Troubleshooting tab (Windows 2000).
Reduce the hardware acceleration by moving the Hardware acceleration
slider to the left, one setting.
Click on OK.
Restart your computer.
Access Scan-X and perform a laser scan.
You are able to see the laser scan in "real-time"
You moved the Hardware acceleration slider all the way to the left, as
shown here
A-3