Table of Contents
Advertisement
Registering Scan-X
When you initially start Scan-X, the software displays the Machine Registration
dialog box, which prompts you to register the software. You can register Scan-X
now or later.
To register Scan-X now, follow the steps below.
1.
2.
Note: The serial number is located on top of the unit.
3
To register Scan-X later, simply click on the Demo button to run Scan-X as a
demonstration copy, and register at a later time.
Note: Scan-X comes with a 60 day trial period. After the trial period expires,
you need to register Scan-X in order to continue using the software.
When you are ready to register Scan-X, follow the steps below.
1.
2.
3.
Note: The serial number is located on top of the unit.
4.
Installation and Setup
Insert the supplied Options disk into the floppy drive.
Enter the serial number of your Cobra (for example, CB1105) in the Serial
Number box.
Click on the Register button.
In Scan-X, select Register Software in the Help menu.
The Machine Registration dialog box is displayed (see above).
Insert the supplied Options disk into the floppy drive.
Enter the serial number of your Cobra (for example, CB1105) in the Serial
Number box.
Click on the Register button.
2-31
Advertisement
Table of Contents
