Sahara -Pak HC-1260 Instruction Manual page 44

Model No.: HC-1260 M4 DIRUX
Serial No.: 63116
Job Order No.: 3094
DESIGN OPERATING CONDITIONS:
Gas Composition:
Inlet Flow Rate:
Inlet Pressure:
Inlet Temperature:
Inlet Moisture Content:
Outlet Moisture Content:
DETAIL SPECIFICATIONS:
Operation:
Dryer Cycle (NEMA):
Cycle Time:
Adsorbent Type:
Buffer Absorbent Type:
Purge Rate (Stripping):
Source:
Design Pressure:
Pressure Drop:
Connection Size
Chamber Insulation:
Reference E003
Page 1 of 2
HENDERSON ENGINEERING COMPANY, INC.
Sandwich, Illinois
HEAT-OF-COMPRESSION REGENERATIVE AIR DRYER SPECIFICATION SHEET
Customer:
Customer P.O. No.:
Customer Tag No.:
Project Reference:
AIR
1300
SCFM (Referred to 70F and 14.7 PSIA)
115 PSIG
F
350
SATURATED
Inlet Wet Bulb 80F......-100F Pressure Dew Point
Inlet Wet Bulb 50F......-113F Pressure Dew Point
Inlet Wet Bulb 32F......-114F Pressure Dew Point
Automatic
480 Mins.
Mins. on Stream
240
3/16" ACTIVATED ALUMINA DESICCANT
N/A
25.2 SCFM
Dried Gas Other
150 PSI
4.3 PSID (Max.)
3" RF FLG
None Indoor
AIRDYNE, INC.
1059379
Mins. Heating
90 90
Open System Closed System
ASME Code Stamped: Yes
Chamber Relief Valves: Yes
Outdoor
Date 10/02/13
Mins. Stripping Mins. Cooling
60
792 # per Chamber
N/A # per Chamber
No
No
Rev 1
07/10/2012