INSTRUCTION MANUAL
Model HC
3.0.1 Short-Term Shut-down
Attention!
After the following step, dryer will remain pressurized!
Advice: The following sequence is to be heeded when switching off the
3.0.2 Shut-down in Case of a Fault or for Maintenance
Danger!
Before any kind of maintenance or repair work is done, the dryer
must be depressurized and disconnected from the power source.
Apply the general safety regulations!
Reference 219
Page 38 of 46
adsorption dryer:
First close all the shut off valves up and downstream of
dryer.
Then immediately switch off the dryer.
Rev 2
06/20/2013