Advertisement
Installation
The package contains the following:
1x Sensor
1x Sensor mounting bracket
4x screws
2x jumper
1x battery
3x pieces of adhesive tape
Mount bracket to wall
STEP ONE
First attach the sensor mounting bracket to the wall using either adhesive tape OR screws (optional). For best performance mount
the bracket 6.5 to 7.5 feet above the floor (2 to 2.3 meters).
Corner Mount
Note: For best results, attach adhesive tape to bracket FIRST, then position on wall. Adhesive tape is VERY STRONG so moving the bracket after attaching will be
difficult.
© 2018 Ecolink Intelligent Technology Inc.
Adhesive
Bracket
Screws
(Optional)
Flush Mount
PN H214101 RevA
Advertisement
