Download Print this page
Ecolink TILT-ZWAVE5 Installation Manual

Ecolink TILT-ZWAVE5 Installation Manual

Z-wave plus garage door tilt sensor

Advertisement

Quick Links

Z-Wave Plus
Garage Door Tilt Sensor
DISCLAIMER AND LIMITATION OF LIABILITY
OTHER THAN THE LIMITED WARRANTY ABOVE, ECOLINK MAKES NO OTHER WARRANTY OR
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. YOU ACKNOWLEDGE THAT
YOU ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE
REQUIREMENTS OF THE INTENDED USE.
IN NO EVENT SHALL ECOLINK OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY INCIDENTAL,
SPECIAL, INDIRECT, CONSEQUENTIAL, OR MULTIPLE DAMAGES, INCLUDING BUT NOT
LIMITED TO, LOST PROFITS, LOSS OR DAMAGE TO SOFTWARE OR DATA, OR DAMAGE TO
EQUIPMENT ARISING OUT OF THE USE OF ANY PRODUCT, EVEN IF ECOLINK HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHER, IN NO EVENT SHALL THE
LIABILITY OF ECOLINK OR ITS AFFILIATIES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT
ON WHICH LIABILITY IS ASSERTED.
By the act of use, setup or assembly of the product, you accept all resulting liability. If you as
the purchaser or user are not prepared to accept the liability associated with the use of the
product, you are advised to return the product immediately in new and unused condition to
the place of purchase. Some states do not allow the exclusion or limitation of incidental or
consequential damage, so the above limitations may not apply to you.
LIMITED WARRANTY
This limited warranty is provided by Ecolink Intelligent Technology ("Ecolink") to you as the
original purchaser of the product. Ecolink warrants this product to be free from defects in
material and workmanship for a period of one (1) year from the date of original purchase. The
determination of whether the product is defective shall be made by Ecolink in its sole
discretion with consideration given to the overall performance of the product. If Ecolink
determines that any product is defective, Ecolink's sole obligation and your sole and exclusive
remedy shall be that Ecolink will replace the product.
This warranty does not apply to damage caused by shipping or handling, or damage caused
by accident, abuse, misuse, misapplication, ordinary wear, improper maintenance, failure to
Installation Guide
follow instructions or as a result of any unauthorized modifications. The foregoing limited
warranty is and shall be in lieu of any and all other warranties, whether expressed or implied
and of all other obligations or liabilities on the part of Ecolink. Ecolink neither assumes
responsibility for, nor authorizes any other person purporting to act on its behalf to modify
or to change this warranty, nor to assume for it any other warranty or liability concerning this
product. It is recommended that the customer check their equipment on a regular basis for
proper operation
RETURN POLICY
Please visit us at www.discoverecolink.com/return to view our return policy.
© 2019 Ecolink Intelligent Technology Inc.
PN TILT-ZWAVE5

Advertisement

loading
Need help?

Need help?

Do you have a question about the TILT-ZWAVE5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ecolink TILT-ZWAVE5

  • Page 1 YOU ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE INTENDED USE. IN NO EVENT SHALL ECOLINK OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL, OR MULTIPLE DAMAGES, INCLUDING BUT NOT...
  • Page 2 The Tilt sensor must be located on the top panel AND have the arrow on o 1x Mounting Bracket Screw the side of the sensor pointing UP in order to operate properly. © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5...
  • Page 3 Peel back the outer layer of one side of the adhesive tape, successful. stick the tape to the garage door and press firmly. Peel back the outer layer on the other side of the tape and press the mounting © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5...
  • Page 4 (Inclusion/Exclusion) Factory Default The Z-Wave Plus Tilt Sensor can be factory defaulted by pressing and holding the factory reset button for 5 seconds. © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5...
  • Page 5 * If you set Parameter 3 and 4 to the same byte value, Parameter 4 must be set first before Parameter Tilt Clear Notification report YES* 3 can be set. The opened tilt angle must be greater than the closed tilt angle © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5...
  • Page 6: Fcc Compliance Statement

    VERSION Consult the dealer or an experienced radio/TV contractor for • WAKE_UP help. ZWAVEPLUS_INFO Warning: Changes or modifications not expressly approved by Ecolink SECURITY_2 Intelligent Technology Inc. could void the user’s authority to operate the equipment. SUPERVISION TRANSPORT_SERVICE This device complies with Industry Canada license-exempt RSS standard(s).