Set Up Voicemail; Three Way Conference - Cisco SPA504G Manual

Hide thumbs Also See for SPA504G:

2019/09/05 13:46

portal password: for voicemail access

In case you have forgotten your web access password, contact your IT department.

Setup Voicemail

Call the voice portal from your device. (999)

Then choose '1 ' to go to your voicemail.

Then choose '2 ' to change the greeting of your mailbox for "busy" or '3' for "no answer".

Then choose '1 ' to enter a new greeting.

Enter the greeting and ﬁnish by pressing # on your device.

Follow further spoken instructions of the system if necessary.

Forward Calls

Pick up Call from colleague

Change Language

To have a conference call with two other participants follow the steps below:

Dial the number of the ﬁrst person and set up the call.

Press the conf button:

When hearing the dial tone, dial the number of the second participant.

After establishing the call with the second participant press the conf button again:

Both participants are now in the conference.

To organise conference calls with more participants or with more ﬂexibility use the

Conference facility of the

telephone manual - https://support.iplussolutions.org/dokuwiki/!phone/

system.

3/5

Telephone Manual

Meet-Me

Table of Contents