progeo Basic Light User Manual page 14

DESK ARMREST
This type of armrest is quite practical. You can remove it to make transfer easier.
The Desk armrest includes a skirt guard.
Always check the armrests are securely
locked in their using position.
If this instruction is ignored the wheelchair or
the user may overbalance.
In order to check the correct position of use, with one hand, take
hold of the armrest's pad and try to pull it up.
If correctly locked, the armrest does not come off the support S,
nor does the pad moves up.
To remove the armrest, lower the lever A first, then, take hold of the
armrest's pad and pull it off.
To lock the armrest in its using position, first, make sure the lever A
is lowered. Then, insert the tube T into the support S.
S
Finally, raise the lever A.
Check the armrest is securely locked as above-mentioned.
A
S
Position of use
T
A
The user can also easily height adjust the armrest.
Turn the lever B by 90° and then pull the pad up or push it down to the desired height.
After adjustment, turn the lever B until it locks in one of the holes of the tube T.
T
B
B
Basic Light 14