Emerson Rosemount 2410 Manual Supplement page 11

Tank hub upgrade instruction for primary bus and secondary bus

Hide thumbs Also See for Rosemount 2410:

Manual Supplement

00809-0200-2410, Rev AA

23.

24.

25.

26.

27.

28.

29.

Rosemount 2410 Tank Hub

Remove the old label plate and replace it with the new one.

Apply the new main label on the plate.

Connect the device and power it on, if a display is present make sure the device is

working properly. When there is no display present contact the control room and

verify that the device is back on-line.

If a start code is included with the upgrade it must be entered before full

functionality can be achieved.

Start WinSetup board, find the upgraded 2410 Device, right click on it and select

properties. Under Advanced tab select on Upgrade Device button.

Enter the Start Code as specified in the information provided with the upgrade.

Select OK and Apply to close the properties window.

Your 2410 device is now upgraded. You may need to make additional configuration

adjustments based on type of upgrade. See 2410 Tank Hub Reference Manual

(Document No. 00809-0100-2410) for more details

Rosemount 2410 Tank Hub

November 2015