Emerson Rosemount 2410 Manual Supplement page 10

Rosemount 2410 Tank Hub
November 2015
16.
17.
18.
19.
20.
21.
22.
10
Place the electronic package back into the housing and secure it with the screws.
Connect all the cables back to the mother board where applicable.
Make sure that cables are not pushed down in the space next to the IS Component
(if present), the cabling might otherwise impair Intrinsic Safety of the Board.
Arrange the cables so that they can't be damaged by the threads when mounting
the housing cover.
Snap on the Display cover or the Label Display Cover (depending on the version).
Inspect the O-ring on the housing cover, make sure it is not damaged, and if it is dry
apply some grease on the O-ring and the threads. Damaged O-ring must be
replaced with a new one.
Tighten the cover.
Manual Supplement
00809-0200-2410, Rev AA
Rosemount 2410 Tank Hub