Table of Contents
Advertisement
CONTENTS OF THIS USERS MANUAL
GRAPHIC SYMBOLS
Your Labnet Problot hybridization incubator uses internationally accepted graphic symbols
to help convey information to the user and to call the users attention to important safety
precautions and guides for using this equipment. Use of this product in any manner not
specified by the manufacturer may impair the safety protection provided by the
equipment and may result in physical damage and/or personal injury. Please read
all operating instructions in this manual prior to use of this equipment.
indicates that user should consult manual further description or discussion.
Indicates AC "Power On"
Indicates "Degrees Centigrade"
Indicates Potential "Shock Hazard"
SAFETY PRECAUTIONS
1. Although the Problot Hybridization system has been designed to minimize user expo-
sure to radioactive materials, proper precautions must be taken when using radioactive
material.
2. Always inspect the hybridization bottles, caps and seals before use. Do not use
bottles, caps or seals that are cracked or chipped. Cap seals should be replaced if they
are severely deformed or discolored. Special attention should be paid to inspecting
bottle rims / threads.
3. DO NOT take bottles to temperatures higher than 70C without opening and retight-
ening
the cap to relieve pressure build-up. Temperatures above 70C can cause breakage of
hybridization bottles. If chamber temperatures rise above 70C when bottles are in use,
DO NOT OPEN THE OVEN DOOR. Reduce the temperature setting to below 70C or
turn the power off and allow sufficient time for the bottles to cool below 70C before
opening the door.
page 1
page 1
page 2
page 2
page 2
page 3
page 3
page 3
Indicates "Heating"
Indicates "Temperature"
Indicates Protective "Earthground"
page 4
page 5
page 5
page 6
page 6
page 6
page 7
page 7
Advertisement
Table of Contents
Need help?
Do you have a question about the ProBlot 6 and is the answer not in the manual?