Measuring Frequency; Table 2-7 Measurement Positions Allowing Frequency - Keysight Technologies U1461A User Manual

Measuring Frequency

Your tester allows simultaneous monitoring of real-time voltage or current with
frequency measurements. To measure frequency, rotate the switch to one of the
positions highlighted in
Probe the test points, and read the display.
Table 2-7 Measurement positions allowing frequency measurements
Legend Defaul t function
Rotary switch
Primary d isplay
position
AC V
AC V
Auto (V)
Auto (mV)
Auto (μA mA)
Never measure the frequency where the voltage or current level exceeds the
WARNING
specified range. Manually set the voltage or current range if you want to
measure frequencies below 20 Hz.
– Pressing
NOTE
– To obtain the best measuring results for frequency measurements, please use
U1461A/U1453A User's Guide
controls the input range of the primary function (voltage or
ampere) and not the frequency range.
the AC measuring path.
Table 2-7 and set up the tester accordingly. Press
Secondary d isplay
-
-
AC+DC V
AC+DC mV
AC+DC (μA mA)
Making Measurements 2
.
79