Freezing The Display (Trighold And Autohold) - Keysight Technologies U1461A User Manual

Freezing the Display (TrigHold and AutoHold)

TrigHold operation
Press
function, except for the
function.
Pressing
NOTE
position will result in a test being performed instead.
AutoHold operation
Press and hold
any function, except for the
Ω
Pressing and holding
NOTE
the Ω
AutoHold monitors the input signal and updates the display and, if enabled, emits
a beep, whenever a new stable measurement is detected. A trigger point is one
that varies more than a selected adjustable (AutoHold threshold) variation count
(default 500 counts based on DDDDD option selected in Setup). Open lead
conditions are not included in the update.
To change the default AutoHold threshold count see
count"
If the reading value is unable to reach a stable state, the reading value will not
NOTE
be updated.
U1461A/U1453A User's Guide
to freeze the display for any
when the rotary switch is in one of the
or the Ω function.
Mega EB
position will result in a test being performed instead.
EB
on page 125 for more information.
or the Ω
Ω
Mega EB
to activate AutoHold for
when the rotary switch is in one of the
Tester Features
or the Ω
Ω
Mega
Ω
Mega
"Changing the variation
3
EB
or
105