Canon EOS 20D Service Manual page 95

Shooting
Quality
Red-eye on/off
Beep
Shoot w/o card *
AEB
WB SHIFT/BKT *
Custom WB
Color temp.
Color space *
Parameters
[Major Changes Compared to EOS 10D]
*1: The EOS 10D's C.Fn-02 [Shutter release without CF card] function has been moved to a menu setting.
Shutter release can now be disabled even in the Basic Zone modes if there is no CF card.
*2: The WB correction feature has been added, and both the WB correction and WB bracketing can be set on
the same screen.
*3: [Adobe RGB], which was within the EOS 10D's [Processing parameters], is now a separate setting that can
be selected along with sRGB. Adobe RGB can also reflect any parameter setting.
*4: The EOS 10D's [Image preview] and [Image preview time] have been combined.
*4: If you press the Info button while an image is displayed, you can change the display format of single-image
playback.
*5: The image and gray chart are displayed together on the screen.
*6: In addition to the EOS 10D's 12 languages, three new ones have been added (provided by firmware
update).
*7: If a CF card containing the firmware update is installed in the camera, the firmware update will start when
this item is selected.
6) Custom Functions
Custom Functions different from the EOS 10D's are listed below.
New Custom Functions
C.Fn-02 Long exposure noise
reduction
C.Fn-08 ISO expansion
C.Fn-13 AF point selection method
C.Fn-14 E-TTL ll
C.Fn-18 Add original decision data
Modified Custom Functions
C.Fn-03 Flash sync speed in Av
mode
C.Fn-05 AF-assist beam
C.Fn-06 Exposure level increments
C.Fn-07 Flash firing
Table 010 Menu items
Playback
Protect
Rotate
Print Order
1
Auto play
4
Review time *
2
3
Table 011 Custom Function Changes (1/2)
Works with shutter speeds 1 sec. or longer. Noise reduction requires the
same time as the exposure time.
Moved from EOS 10D's menu setting.
Enables the AF point to be selected directly with the Multi-controller or Quick
Control Dial/Main Dial.
When set to 1: Averaged flash exposure, the entire image will be averaged for
autoflash.
When set to 1: Yes, the original image verification data will be appended
automatically.
Flash sync speed changed to 1/250 sec. fixed.
The EOS 10D's C.Fn-05 "AF-assist beam/Flash firing" has been split into two:
C.Fn-05 and C.Fn-07.
Changed to 0: 1/3 stop 1: 1/2 stop
Same as C.Fn-05. When set to 1: Off, all flash units will not fire.
23
Technical Information
Setup
Auto power off
Auto rotate
5
LCD Brightness *
Date/Time
File numbering
6
Language *
Video system
Communication
Format
Custom Functions(C.Fn)
Clear settings
Sensor clean.
Firmware Ver.*7