Canon EOS 20D Service Manual page 46

18-7 Trimming:
18-8 Layout:
18-9 Date imprinting:
18-10 DPOP printing:
18-11 Transmission protocol: PTP
18-12 Data transfer system:
18-13 Printable images:
19. Print specification (DPOF)
19-1 System:
19-2 Specification with print: 1) Individual images
19-3 Print type:
Trim horizontally up to 8 steps, vertically up to 5
steps.
• The trimming method will depend on the
CPD/BJD printer.
Borders, borderless, 8/2/4/9/16/20-image print
(An X number of the same image is printed on a
sheet.), Normal ("Borderless" with Canon
printers)
• Selectable layouts may differ depending on
the printer.
ON, OFF, Normal ("ON" with Canon printers)
• If the printer does not have the date-
imprinting feature, the date will not be
imprinted even if the "ON" is set.
DPOF-specified printing is possible
(1) If both Standard and Index are set, only
Standard printing will be executed.
(2) The file No. will not be imprinted even if it
is set to "ON" (BJ printers are not geared to
imprint the file No.).
• Set with the menu's [Communication].
JPEG
• Image processing is executed by the
printer.
JPEG (Fine/Middle/Small) images
• JPEG images in RAW+JPEG images can be
printed, but not RAW images.
Complies to DPOF Version 1.1
2) All images in CF card
• Print specification is not possible for RAW
images.
1) Standard
2) Index
3) Both
41
General Information