Canon EOS 20D Service Manual page 136

<Disassembly Procedure>
1) Shutter ass'y removal
Remove the 3 screws and remove the shutter
ass'y.
Be careful not to touch the
1
CAUTION
shutter blade.
2) Viewfinder ass'y removal
Remove the 2 screws and remove the
viewfinder ass'y.
Be sure to protect the lens of
the viewfinder ass'y from being
2
CAUTION
scratched or getting dirty.
3) Wing removal
Remove the 2 screws and remove the wing.
4) Flash PCB ass'y removal
Remove the 2 screws and disconnect 1 flex
connector. Then, remove the finder ass'y.
Replacement flash PCBs do not contain a magnet coil, so take the
3
CAUTION
magnet coil from the old one.
Remove
Disconnect
29
Repair Information
Remove
Fig. 090
Remove
Fig. 091
Fig. 092
Remove
Fig. 093