1.6 Locally-Made Parts
1) SPD Positioning Mask
On a black low-reflectance paper, make holes as arranged below.
2) Tools Battery
Preparation:
•
•
DY9-1374
1.2mm dia. lead wires (red and black)
Procedure:
(1) Prepare 3 aformentioned products.
(2) Solder the lead wires to the battery contacts, and let the wires through the
hole of the battery cover.
DY9-1374-000
As shown in the right
figure, replace the
lead wires first and
then put the battery
cover on.
ø 57mm
ø 4~6mm
ø 2~3mm
Fig. 014
•
Two terminals
Fig. 015
7
Repair Information