Agreed Items; Agreed Answers For User Support - Canon EOS 20D Service Manual

General Information

9. AGREED ITEMS

9.1 Agreed Answers for User Support

:Also applies to the EOS 10D.
[Imaging sensor]
1. When cleaning the CMOS sensor,
use only a hand blower to blow off
dust, etc. Never touch the CMOS
surface with any brush, cloth, or
cleaning agent. Also do not use
pressurized (canned) air or gas to
clean the CMOS sensor.
2. If there is a strong light source
within the image area, ghosting
might occur at a symmetrical
position or near the light source.
[Image Recording and Playback]
3. While the access lamp is blinking, do
not shake or subject the camera to
any physical shock and do not open
the Compact Flash card slot cover or
remove the battery.
4. Do not leave or use the camera near
a strong magnetic field such as a
television, audio speaker, or magnet.
5. Do not leave or use the camera near
an electronic transmission tower,
etc., which emits a strong magnetic
field.
Cautions Remarks
This is to prevent damage to the sensor
As per the design of low-pass filter.
Doing so may damage the stored images,
Compact Flash card, or even the camera
itself.
A magnetic or electromagnetic field can
adversely affect the image on the LCD
monitor. It may also prevent proper
shooting and image recording and damage
images in the Compact Flash card.
The electric wave can adversely affect the
image on the LCD monitor. It may also
prevent proper shooting and image
recording and damage images in the
Compact Flash card.
58