Canon EOS 20D Service Manual page 66

[Custom Functions]
20. When C.Fn-12-1 is set and mirror
lockup is in progress, do not point
the camera toward the sun or any
other bright light.
[Camera Direct]
21. If the BJ Direct is set to print with
borders and the date, the date will
be imprinted on the border.
22. If the CP Direct is set to print the
date, the date may look light if the
background is light or if the date is
imprinted on the border.
[Interface]
23. Do not excessively bend or
disassemble the interfaceable.
24. Before displaying captured images
on a TV monitor, check whether it
uses the NTSC or PAL system.
[LCD Monitor]
25. When the LCD monitor is on, there
might be black, red, or green dots
that are always visible.
26. Do not press on the LCD monitor
with your fingers or subject it to
strong vibration or physical shock.
This is to prevent burn-in of the shutter
curtains, stray light from entering, and
sensor damage.
This is due to a problem with the BJ
printer. It is not a problem with CP Direct.
(In the case of photos taken by a Canon
PowerShot camera, the aspect ratio is 4:3 so
the date imprinted by BJ Direct appears
slightly above the bottom border. However,
since the aspect ratio of photos taken by
EOS DIGITAL cameras is 3:2 with a shorter
vertical length, the imprinted date appears
on the border. The result is the same with
DPOF direct printing.)
This is due to a problem with CP Direct.
Malfunction may result due to cable
disconnection or short-circuiting.
If the TV monitor uses a different system,
the images will not be displayed properly.
(The default setting is NTSC for the Japan
and N. America, and PAL for other
countries.)
These are dead pixels which number 0.02%
or less of the LCD monitor's total number of
effective pixels. The recorded images are not
affected.
Doing so may result uneven color or break
of the LCD monitor.
61
General Information