How To Pair Two Midland Btnext Pro Units - Midland BTNEXT PRO Instruction Manual

conds until the RED indicator flashes 3 times, thus lessening the chances that you might
turn off the unit accidentally (especially whilst wearing gloves).
Operative "mode"
The BTNEXT PRO can operate in three main "mode": Intercom, Phone and FM Radio.
The 3 multi function buttons can have different functionality depending on which mode
the unit is at that moment.
› In "Intercom mode" the three buttons let you manage the Intercom communications
between driver and passenger or bike to bike.
› In "Phone mode" you can manage your Bluetooth mobile phone to place/answer a
phone call or to listen to the music or GPS App. announcement (in stereo mode).
Please use your phone responsibly and safely.
› In "FM Radio mode" you can listen to your favourite radio station in stereo, seek for a
specific radio station and save it (6 memory are available).
You can switch (toggle) from one mode to the other simply pressing the Middle button
for 3 seconds. A voice announcement will tell in which mode you are on.
The toggle sequence is the following:
› Intercom mode (if another unit has been paired)
› FM Radio
› Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is the last used mode.
The Intercom mode and Phone mode are avalaible only if it was previously paired to ano-
ther unit or to a phone.
If you need to know in which mode the unit currently is, just press the "Volume + " and
"Volume –" button together. A voice announcement will tell you the current mode.
Maximum Distance
You can reach 1.6 Km intercom distance if you are in line of sight without ob-
structions and interferences (the riders must be always in sight).

How to pair two Midland BTNEXT PRO units

The two units supplied in the same Midland BTNEXT PRO box, are already paired and
ready to use, this means you don't need to perform this procedure. The units are already
www.midlandeurope.com
paired using the Middle button.
If the devices are not part of the same kit, or the units has been purchased separately, you
need to first pair them in order to use them.
To pair the Midland BTNEXT PRO to another Midland BTNEXT PRO unit
To pair the Midland BTNEXT PRO to another Midland BTNEXT PRO unit, you must first
enter the setup mode:
1. Turn off the unit
2. Press and hold down the middle button about 7 sec., until the Red light is on perma-
nently.
3. Now press the Middle button for 3 seconds. The Blue and Red lights will flash.
4. Do the same procedure on the other unit. When successfully paired, each unit will have
the Blue light on for one second and then go back to the setup mode (Red light always
on).
5. Now the pairing procedure is complete, you just need to exit the setup mode before
you can use the units.
6. Double click on the Middle button, the Red light will turn off and the Blue light will start
flashing.
You can use now your Midland BTNEXT PRO
Attention: remember to switch off all the other Bluetooth device that are not part of the pai-
ring procedure, only the two devices involved in the pairing must be turned on.
How to use the Intercom with two units
To use the intercom feature, be sure that both units are turned on and correctly paired
together.
Manual activation
When in "Intercom Mode" press the Middle button on one of the two units in "Intercom"
mode. Communication is enabled and remains active until you press again the middle
button. The intercom need some seconds to activate, you will hear a beep tone when the
intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened and will
remain active for the time you are talking. If there is no conversation the intercom will be
25