Switching On And Off Your Midland Btnext Pro - Midland BTNEXT PRO Instruction Manual

Step 3.Then, tighten more the two screws in order to firmly fix the clamp in place on the
left side of the helmet.
If neccesary, you can use also the rubber plate in order to have more grip for the screw
clamp. Just use the two short screw to fix the rubber plate on the slide-in mount and
tighten the screw plate again.
Here is an example of the buttons main functionality based on the mode you are on.
Mode
Intercom
Phone
Phone (while music play)
FM Radio
24
Rubber Plate
Forward (Left button)
Open/close the intercom to the first rider
Redial last number/accept or reject incoming call on
"Vol+"
Forward the song
Scan up
Fitting and removing your Midland BTNEXT PRO
The BTNEXT PRO can be easily fitted onto the helmet by sliding it downwards on the
sliding mounting kit. BTNEXT PRO is maintained in position thanks to the fixing clip
located on the upper section (A).
To detach the BTNEXT PRO, simply press the fixing clip and push the unit upwards.
Lock

Switching ON and OFF your Midland BTNEXT PRO

Switching the unit on:
Press and hold "Middle" button for approximately 3 seconds until the BLUE indicator
lights.
Switching the unit off:
Press and hold both "Middle" and "Backward" buttons together for approximately 3 se-
Middle button
Open/close the intercom to the second rider Open/close the intercom to the Third rider
Play/pause
FM Radio On/off
A
Unlock
Rear (Right button)
Redial last number/accept or reject incom-
ing call on "Vol-"
Backward the song
Scan down
www.midlandeurope.com