Accu-Scope 3002-CB Forensic Comparison Series Manual page 9

ASSEMBLY
Fig. 7
ACCU-SCOPE ®
3002-CB FORENSIC COMPARISON MICROSCOPE SERIES
(continued)
Fuse holder
Female end of
power cord
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
Connecting the Power Cord
Do not bend or twist the power cord.
Before connecting the power cord, make sure
the switch is off (O).
Insert the female end of the power cord plug
securely into the power cord socket on the back
of the microscope Fig. 7.
Connect the other end into a 110v/220v outlet.
Replacing the Fuse
Before replacing the fuse, make sure the switch
is off (O) and unplug the power cord from outlet.
Using a flat head screwdriver, remove the fuse
holder (see Fig. 7), and unscrew the old fuse
and insert the new fuse. Replace the fuse
holder and retighten with the screwdriver.
9