Accu-Scope 3002-CB Forensic Comparison Series Manual page 18

ILLUMINATION PROBLEMS
Problem
The lamp can't light
when the switch is
turned on
The lamp burns out
suddenly
ACCU-SCOPE ®
3002-CB FORENSIC COMPARISON MICROSCOPE SERIES
No power
The lamp burned out
Using a substandard lamp
The voltage is too high
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
Cause Corrective Measure
Check the connection of
the power cord
Replace
Use the specified lamp to
replace; if the problem is
not solved, contact
service department
18