Appendix E: Design Examples, Network Interface
•
DC/DC transformer selection recommendations:
–
1:2.1 turns ratio
–
500 kHz switching frequency
–
The transformer shall be able to deliver at least 100 mA on the network interface side
without saturating, at Anybus CompactCom min/max supply voltage, and at the
relevant min/max ambient temperature that is applicable
–
Under the above circumstances, the transformer and rectifier output voltage must
allow the regulator tokeep the 5V rail inside a ±5% tolerance
Anybus
®
CompactCom B40-1 Design Guide
75 (78)
HMSI-27-230 3.4 en-US
Need help?
Do you have a question about the Anybus CompactCom B40-1 and is the answer not in the manual?
Questions and answers