Table of Contents
Advertisement
To adjust the ring volume with the handset:
Route:
BaseStation » Settings » Volume » Ring
1.
Select
and press
Ring
The current ring volume setting is displayed (0 is the quietest level and 6 is
the loudest level.
2.
Press the
or
U P
You can now also use the
handset to change the volume. Each time you press
VO L U M E D OW N
3.
Press
to confirm.
Y E S
The base station ring volume level has now been changed.
RINGING ORDER
When the base station receives an external call, all handsets ring. The base sta-
tion is pre-set so that all handsets ring at the same time. However, you can also
set the order in which the handsets ring.
Setting the ringing order
Using a handset, you can program the order in which the handsets ring.
To change the ringing order:
Route:
BaseStation » Settings » Basic » RingOrder » Priority
1.
Select
Basic
and press
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 78) and press
3.
Select
Priority
and press
The current ringing order is displayed.
4.
Press
or
U P
D OW N
•
means only handset 1.
One
•
One, Rest
means first handset 1, then all handsets.
•
One, Two..
means first handset 1, then 2, then 3, etc.
•
All
means all the handsets at the same time (default).
5.
Press
to confirm.
Y E S
The ringing order has now been stored.
If the handset that should ring first has been switched off, the next handset
rings instead.
.
Y E S
key once, or more, to turn the volume up or down.
D OW N
VO L U M E U P
, you hear the ring at the new volume.
.
Y E S
.
YE S
to select one of the following options:
Personalizing the base station
or
VO L U M E D OW N
VO L U M E U P
key on the
or
.
Y E S
61
Hide quick links:
Advertisement
Table of Contents
