Re-Subscribing To A Base Station - Ericsson cordless 260 User Manual

Home 2
01–Dec 11:32
4. Enter the authentication code or the PIN code of the base station.
Each digit of the AC number that you enter is shown only as
purposes.
5. Press to confirm.
Y E S
The handset now looks for base stations in subscription mode using the
AC number to test if it is allowed to subscribe.
6. Wait until
Subscription Ready
The handset is connected to the base station. You can see its internal phone
number on the right-hand side of the display.
If you get the following message, try to subscribe again:
• Subscription Failed : the AC number you have entered does not match the base
station AC number, or the base station cannot add another subscription.

RE-SUBSCRIBING TO A BASE STATION

Re-subscribing to a base station replaces the existing subscription data. Re-
subscribing can be used to update the subscription data in the handset. For
example, if telephone numbers change
This function is reserved for future use.
You can only re-subscribe to the currently connected base station. If neces-
sary, first select the base station you want to re-subscribe to (see "Manual
selection" on page 102).
This menu option is only available if the handset is connected to a base
station.
To re-subscribe the handset to the currently connected base station:
Route:
Networks » Resubscribe
1. Select Resubscribe
Resubscribe? is displayed.
2. Press to confirm.
Y E S
Resubscribng is displayed while re-subscribing takes places.
is displayed for a short time.
Resubscribe
and press .
YE S
for security
can be used to update them.
Using base stations 101