Table of Contents
Advertisement
46
Personalizing the base station
RING VOLUME
The base station rings when an external call is received. You can adjust the
ring volume.
To adjust the ring volume with the handset:
Route:
BaseStation » RingVolume
1.
Select
RingVolume
The current ring volume setting is displayed (0 is the quietest level and 6 is
the loudest level.
2.
Press the
or
U P
You can now also use the
handset to change the volume. Each time you press
VO L U M E D OW N
3.
Press
to confirm.
Y E S
The base station ring volume level has now been changed.
RINGING ORDER
When the base station receives an external call, all handsets ring. The base sta-
tion is pre-set so that all handsets ring at the same time. However, you can also
set the order in which the handsets ring.
Setting the ringing order
Using a handset, you can program the order in which the handsets ring.
To change the ringing order:
Route:
BaseStation » Basic » RingOrder » Priority
1.
Select
Basic
and press
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 58) and press
3.
Select
Priority
and press
The current ringing order is displayed.
4.
Press
or
U P
D OW N
•
means only handset 1.
One
•
means first handset 1, then all handsets.
One, Rest
•
One, Two..
means first handset 1, then 2, then 3, etc.
•
All
means all the handsets at the same time (default).
5.
Press
to confirm.
Y E S
The ringing order has now been stored.
If the handset that should ring first has been switched off, the next handset
rings instead.
and press
.
Y E S
key once, or more, to turn the volume up or down.
D OW N
VO L U M E U P
, you hear the ring at the new volume.
.
Y E S
.
YE S
to select one of the following options:
or
VO L U M E D OW N
VO L U M E U P
key on the
or
.
Y E S
Hide quick links:
Advertisement
Table of Contents
